;-------------- ESLLOADR.GEN  T 1.31  14.03.87 --------------------------------
;
STDLOADR	;standard O/S loader configuration
USRSOM		;user sign-on message
NITIMS		;hardware initialization
MPENIT		;memory parity initialization
;CON96		;ascii console at 9600 baud
CON96/WP	;ascii console at 9600 baud (WP2000)
;
;--- SPD442 benutzen wenn "vierhunderter Boards" eingesetzt werden
;
SPD442		;serial & parallel drivers for IMS 442 board
;
;--- SPD630 und SER630 benutzen wenn "sechshunderter Boards" eingesetzt werden
;
;SPD630		;serial & parallel driver for IMS 631/480 boards
;SER630		;serial driver for IMS 631 board
;
BRT442O		;baud-rate tables for IMS 442/631 with oscillator
;
RTCIMS		;system clock driver
;
DSKTRAN		;disk driver translation interface
;
DSKF		;floppy disc driver
;DSKF8		;disk specification tables for 8-inch diskettes
DSKF5		;disk specification tables for 5-inch diskettes
;
;-- NOTE: Only one hard disk drivers may be included.--
;
DSKW		;disk driver for 8" and 5" winchester
;
;
;-- Specification tables for 5" winchester --
;
DSKW5A1         	 ; 5  MB Winchester spec. tables 1 logical device
;
;DSKW5G1		; 24 MB Winchester spec. tables 1 logical device
;DSKW5G3		; 24 MB Winchester spec. tables 3 logical device
;
;DSKW5L1 	; 10 MB Winchester spec. tables 1 logical device
;DSKW5L2	; 10 MB Winchester spec. tables 2 logical device
;
;-- 1. Device = Wechselplatte, 2. bis 6. Device Festplatte
;
;DSK490         ;disk driver for IMS 490 with AMPEX CMD
;DSKFMTC1       ;disk specification tables for AMPEX CMD 6*16 MB device
;
